Catalogues of sanitary fixtures
Catalogues of whiteware and cold or hot water taps for the InstalSystem package include components used in tap water systems, domestic wastewater gravity systems and rainwater gravity systems. The data and parameters of each element are considered during hydraulic calculations, and finally all elements are included in automatically generated bills of materials. The InstalSystem package includes a neutral catalog with standard whiteware and water taps and extended library of company catalogues (check the list: Partners offering company versions of programs and catalogues).
The range of product types that can be included in the catalogue
- Sanitary ware:
- Toilet bowl (different types),
- Urinal,
- Sink
- Washbasin (np. round, double, collective),
- Bathtub,
- Shower tray (Floor linear drain or wall linear drain for the shower),
- Bidet,
- Drain (bathroom, round or square),
- Drain with collector,
- Washing machine,
- Dishwasher,
- Washer-dryer,
- Drinking fountain,
- Draw-off points:
- Supply valve,
- Flush valve,
- Sprinkler,
- Water supply faucet,
- Flush tank – stand-alone or integrated with frame,
- Indoor hydrant,
- Shower panel,
- Faucet with heater,
- Equipment to prevent water stagnation in water supply systems (water hygiene stations)
- Drains for rainwater gravity systems:
- Roof gully with protective basket,
- Grid type floor drain.
The range of data used
- Products’ names and catalog codes,
- Products’ pictures and short notice “About the company” information,
- (Optional) Dimensions of the elements,
- Technical data for water taps:
-
Connection’s diameter for hot and/or cold water,
-
(Optional) Connection lines spacing,
-
- Technical data for sanitary whiteware:
- Diameter of the sanitary or rainwater drain,
A detailed list of mandatory or optional data for entering your products into InstalSystem software will be provided by our catalogue engineers.
InstalSystem 5 modules using catalogues
The module provides the ability to design water supply systems (hot and cold water, hot water circulation network). Includes graphical editing in the project, pipes and fittings sizing, 2D and 3D drawing presentation, hydraulic calculations, bill of materials. Sanitary accessories can be associated with water draw-off points, which results in a complete installation model together with sanitary equipment of the rooms.
When creating a project, a 3D model is created, which preview can be used to check compliance with the expected state. Model visualization may include installations designed (or designed) in other modules of the InstalSystem 5 package.
Hot and cold water residential installations can form rings (configuration extension required with the ‘Tap water extensions’ module). It is possible to use “Flat station” elements as water heaters (configuration extension with the ‘Flat stations’ module required).
DOMESTIC WASTEWATER GRAVITY SYSTEMS
The module provides the possibility of designing internal gravity sewage systems. It includes graphic editing, selection of pipelines (pipe diameters, fittings), 2D and 3D drawing presentation, bill of materials. It takes into account the sanitary appliances placed in the rooms, resulting in a complete model of the installation including the sanitary ware in the rooms. When the project is created, a 3D model is built, the preview of which can be used to check compliance with the expected state on an ongoing basis. The model takes into account the designed gradients of pipe-runs and, after calculations, also the fittings selected (depending on the catalogues used, they can be made visible in the model).
Stacks can have ventilation sections automatically generated, taking into account various bypass ventilation variants. Before and after the calculation, an in-depth diagnostic of the installation geometry is carried out, considering the standard requirements with regard to route lengths, number of changes of direction, ventilation, etc.
Visualisation of the model can take into account installations designed in other modules of InstalSystem 5 package, in particular the ‘Water supply installations‘ module. The calculated model can be exported in various formats, including IFC, provided that the relevant module is available in the configuration. If fittings are visualised, the exported model takes them into account.
The module provides the possibility of designing rainwater drainage gravity systems for building roofs and their environment. It includes graphic editing, selection of pipelines (pipe diameters, fittings), 2D and 3D drawing presentation, bill of materials. In the course of project creation, a 3D model of the project is created, the preview of which can be used to control compliance with the expected state on an ongoing basis. Visualisation of the model can take into account installations designed (or in progress of designing) in other modules of InstalSystem 5 package.
The module provides the ability to design water supply systems (hot and cold water, hot water circulation network). Includes graphical editing in the project, pipes and fittings sizing, 2D and 3D drawing presentation, hydraulic calculations, bill of materials. Sanitary accessories can be associated with water draw-off points, which results in a complete installation model together with sanitary equipment of the rooms.
When creating a project, a 3D model is created, which preview can be used to check compliance with the expected state. Model visualization may include installations designed (or designed) in other modules of the InstalSystem 5 package.
Hot and cold water residential installations can form rings (configuration extension required with the ‘Tap water extensions’ module). It is possible to use “Flat station” elements as water heaters (configuration extension with the ‘Flat stations’ module required).
DOMESTIC WASTEWATER GRAVITY SYSTEMS
The module provides the possibility of designing internal gravity sewage systems. It includes graphic editing, selection of pipelines (pipe diameters, fittings), 2D and 3D drawing presentation, bill of materials. It takes into account the sanitary appliances placed in the rooms, resulting in a complete model of the installation including the sanitary ware in the rooms. When the project is created, a 3D model is built, the preview of which can be used to check compliance with the expected state on an ongoing basis. The model takes into account the designed gradients of pipe-runs and, after calculations, also the fittings selected (depending on the catalogues used, they can be made visible in the model).
Stacks can have ventilation sections automatically generated, taking into account various bypass ventilation variants. Before and after the calculation, an in-depth diagnostic of the installation geometry is carried out, considering the standard requirements with regard to route lengths, number of changes of direction, ventilation, etc.
Visualisation of the model can take into account installations designed in other modules of InstalSystem 5 package, in particular the ‘Water supply installations‘ module. The calculated model can be exported in various formats, including IFC, provided that the relevant module is available in the configuration. If fittings are visualised, the exported model takes them into account.
The module provides the possibility of designing rainwater drainage gravity systems for building roofs and their environment. It includes graphic editing, selection of pipelines (pipe diameters, fittings), 2D and 3D drawing presentation, bill of materials. In the course of project creation, a 3D model of the project is created, the preview of which can be used to control compliance with the expected state on an ongoing basis. Visualisation of the model can take into account installations designed (or in progress of designing) in other modules of InstalSystem 5 package.
Contact our sales department!