Catalogues of sanitary mounting frames
Mounting frames catalogues for InstalSystem package include various types of frames (hanging, standing) commonly used in sewage and water supply systems for installation of sanitary facilities or bath and shower mixers. Mounting frames used in the project are shown in automatically generated bills of materials.
The InstalSystem package includes a neutral catalog with standard mounting frames and extended library of company catalogues (check the list: Partners offering company versions of programs and catalogues).
The range of product types that can be included in the catalogue
Different types of frames:
- for the installation of whiteware,
- for installation of bath and shower taps.
The range of data used
- Products’ names and catalog codes,
- Products’ pictures and short notice “About the company” information,
- Technical data:
- Mounting frame dimensions (width, height, depth),
- Type of frame (hunging, standing),
- Type of tap fitting the frame,
- Suspension height of sanitaryware on the frame (possible range min-max),
- Optional: Information on type of integrated flush (WC frames),
- Optional: information on type of outlet pipe from the WC element (WC frames and others).
A detailed list of mandatory or optional data for entering your products into InstalSystem software will be provided by our catalogue engineers.
InstalSystem 5 modules using catalogues
The module provides the ability to design water supply systems (hot and cold water, hot water circulation network). Includes graphical editing in the project, pipes and fittings sizing, 2D and 3D drawing presentation, hydraulic calculations, bill of materials. Sanitary accessories can be associated with water draw-off points, which results in a complete installation model together with sanitary equipment of the rooms.
When creating a project, a 3D model is created, which preview can be used to check compliance with the expected state. Model visualization may include installations designed (or designed) in other modules of the InstalSystem 5 package.
Hot and cold water residential installations can form rings (configuration extension required with the ‘Tap water extensions’ module). It is possible to use “Flat station” elements as water heaters (configuration extension with the ‘Flat stations’ module required).
DOMESTIC WASTEWATER GRAVITY SYSTEMS
The module provides the possibility of designing internal gravity sewage systems. It includes graphic editing, selection of pipelines (pipe diameters, fittings), 2D and 3D drawing presentation, bill of materials. It takes into account the sanitary appliances placed in the rooms, resulting in a complete model of the installation including the sanitary ware in the rooms. When the project is created, a 3D model is built, the preview of which can be used to check compliance with the expected state on an ongoing basis. The model takes into account the designed gradients of pipe-runs and, after calculations, also the fittings selected (depending on the catalogues used, they can be made visible in the model).
Stacks can have ventilation sections automatically generated, taking into account various bypass ventilation variants. Before and after the calculation, an in-depth diagnostic of the installation geometry is carried out, considering the standard requirements with regard to route lengths, number of changes of direction, ventilation, etc.
Visualisation of the model can take into account installations designed in other modules of InstalSystem 5 package, in particular the ‘Water supply installations‘ module. The calculated model can be exported in various formats, including IFC, provided that the relevant module is available in the configuration. If fittings are visualised, the exported model takes them into account.
The module provides the ability to design water supply systems (hot and cold water, hot water circulation network). Includes graphical editing in the project, pipes and fittings sizing, 2D and 3D drawing presentation, hydraulic calculations, bill of materials. Sanitary accessories can be associated with water draw-off points, which results in a complete installation model together with sanitary equipment of the rooms.
When creating a project, a 3D model is created, which preview can be used to check compliance with the expected state. Model visualization may include installations designed (or designed) in other modules of the InstalSystem 5 package.
Hot and cold water residential installations can form rings (configuration extension required with the ‘Tap water extensions’ module). It is possible to use “Flat station” elements as water heaters (configuration extension with the ‘Flat stations’ module required).
DOMESTIC WASTEWATER GRAVITY SYSTEMS
The module provides the possibility of designing internal gravity sewage systems. It includes graphic editing, selection of pipelines (pipe diameters, fittings), 2D and 3D drawing presentation, bill of materials. It takes into account the sanitary appliances placed in the rooms, resulting in a complete model of the installation including the sanitary ware in the rooms. When the project is created, a 3D model is built, the preview of which can be used to check compliance with the expected state on an ongoing basis. The model takes into account the designed gradients of pipe-runs and, after calculations, also the fittings selected (depending on the catalogues used, they can be made visible in the model).
Stacks can have ventilation sections automatically generated, taking into account various bypass ventilation variants. Before and after the calculation, an in-depth diagnostic of the installation geometry is carried out, considering the standard requirements with regard to route lengths, number of changes of direction, ventilation, etc.
Visualisation of the model can take into account installations designed in other modules of InstalSystem 5 package, in particular the ‘Water supply installations‘ module. The calculated model can be exported in various formats, including IFC, provided that the relevant module is available in the configuration. If fittings are visualised, the exported model takes them into account.
Contact our sales department!